In order to use the programming interface, you'll need to build a cable that matches your radio. Some examples are included below to get you started.
Motorola Minitor III/IV Pagers
This cable can be used to interface the programmer with the Minitor III/IV/V programming cradles.
See the Motorola Minitor Programmer page for information on building your own (homemade) programming cradle for these pagers, and for information on Minitor 5 firmware upgrades.
Kenwood Handheld Radios (TH-G71A, TH-D7A, etc.)
Motorola GM300
Yaesu FT-2600M
